Rs-232c, Counter control command – Panasonic AG-DTL1P User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RS-232C
Counter control command
Data transmitted by PC
[STX] CCPidata [ETX]
Parameter
data = ghmmsstt
g = Blank : With a positive {+)
value
- sign: With a negative (-)
value
h= 0—9
: Hours (12-hour
system)
mm = 00—59 : Minutes
ss = 00—59 : Seconds
ff = 00—29 : Frames
Data returned from unit in response
[STX] CCP [ETX]
Description of command
Presets a designated counter value on the CTL counter.
<Note>
This command is not acknowledged while a search control
command is being processed or while a tape is being
ejected.
[STX] CLP:data [ETX]
Parameter
data = ghmmssft
g = Blank : With a positive (+)
value
- sign: With a negative (-)
value
h = 0—9
: Hours (12-hour
system)
mm = 00—59 : Minutes
ss - 00—59 : Seconds
ff =
00—29 : Frames
[STX] CLP [ETX]
Presets a designated counter value on the CTL counter.
<Note>
This command is not acknowledged while a search control
command is being processed or while a tape is being
ejected.
[STX] CRT [ETX]
[STX] CRT [ETX]
Resets the CTL counter data.
<Note>
This command is not acknowledged while a search control
command is being processed.
65