Rs-232c, Time lapse control commands – Panasonic AG-DTL1P User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
RS-232C
Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC
Data returned from unit in response
Description of command
[STX] LWR [ETX]
[STX] LWR [ETX]
Deletes the POWER LOSS MEMORY data.
[STX] LXT:m [ETX]
Parameter
m = N: Signals are acknowledged.
F; Signals are not
acknowledged.
[STX] LXT [ETX]
Sets whether the signals from the external timer connected
to the rear panel terminal section are to be acknowledged in
the external timer recording mode.
83
Advertising