Front panel, O power lamp, Cassette insertion slot – Panasonic AG-DTL1P User Manual
Page 5: Orec review button, 0 rec button, Eject button, Parts and their functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parts and their functions
Front panel
o
POWER lamp
This lights when the power is turned on.
©Cassette insertion slot
Always use S-VHS cassette tapes. If a VHS tape is
inserted instead, it will be automatically ejected
when the REC button is pressed. A cassette tape
will also be ejected when the REC button is
pressed if its accidental erasure prevention tab has
been broken out.
This unit is designed to provide the high level of
reliability required of a time lapse recorder for use
in such applications as surveillance, security and
monitoring.
In order to ensure that this unit will perform
reliably
in
recording
operations,
it
is
recommended that the following Panasonic video
tape be used:
S-VHS tape: ST-120 series (120-minute tape)
OREC REVIEW button
Press this during recording to monitor what is being
recorded. Several images captured a moment
before the button was pressed are played back,
and then the recording mode is restored.
It takes about 10 seconds for the playback picture
to appear.
0
REC button
Press this to start recording.
©EJECT button
Press this to eject the cassette tape.
It will not work unless it is pressed firmly.