Panasonic AG-DTL1P - Manual (Page 91)

RS-232C
Query control commands
Data transmitted by PC
tSTX] QLP:n [ETX]
Parameter
n = 0—3
Up to the last 4 sets of data are
designated by this parameter with 0
serving as the latest data.
Data returned from unit in response
[STX] LPLnn:data1;data2 [ETX]
Parameter
nn = 00—99: Alarm number
datai = yyyymmdd
yyyy = 2000—2099: Gregorian
calendar
mm: 01—12: Month
dd= 01—31: Day
data2 = hhmmss
hh = 00—23: Hours (24-hour system)
mm - 00—59: Minutes
ss - 00—59: Seconds
Description of command
Queries the POWER LOSS MEMORY data.
[STX] QLT [ETX] [STX] LTMm [ETX]
Parameter
t = 0: 3-hour recording
1: 9-hour recording
2: 12-hour recording
3: 18-hour recording
4: 24-hour recording
5: 48-hour recording
6: 72-hour recording
7: 96-hour recording
8: 120-hour recording
9: 180-hour recording
A: 240-hour recording
B: 360-hour recording
C: 480-hour recording
D: 960-hour recording
Queries the recording/playback time mode setting.
[STX] OL2 [ETX] [STX] LBZm [ETX]
Parameter
m = N: Buzzer ON
F: Buzzer OFF
Queries the setting of the buzzer operation during alarm
recording and/or sensor recording.
[STX] QMA [ETX] [STX] LMAm [ETX]
Parameter
m = F: Search mode OFF
M: Memory stop mode
A: Alarm search mode
Queries the search mode.
91