Query control commands, Rs-232c – Panasonic AG-DTL1P User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RS-232C
•
Query control commands
Data transmitted by PC
Data returned from unit in response
Description of command
[STX] QAL [ETX]
[STX] ALVO [ETX]
Queries the address ievel.
[STX] QAM:m [ETX]
[STX] LDmdata [ETX]
Queries the alarm recording and/or sensor recording
setting.
[STX] QBM [ETX]
...
[STX] LBMm [ETX]
Queries the setting for the black burst signal processing
when the video signals are switched.
[STX] QBP [ETX]
[STX] LB Pm [ETX]
Queries the camera from which no video signals are to be
output.
[STX] QBR [ETX]
[STX] LBRm [ETX]
Queries the buzzer setting for the results yielded by
performing REC REVIEW.
[STX] QCC [ETX]
[STX] CCPdata [ETX]
Queries the counter data (same as the QCD command).
[STX] QCD [ETX]
[STX] CDdata [ETX]
Queries the counter data (same as the QCC command).
[STX] QDA [ETX]
[STX] LDAm [ETX]
Queries the output setting of the control signals to the
component connected to the ALARM OUT terminal.
[STX] QDB [ETX]
[STX] DBm [ETX]
Queries the color setting for the characters.
[STX] ODD [ETX]
[STX] DDSd:t:m:r [ETX]
Queries the display item setting for the monitor screen.
[STX] QDF [ETX]
[STX] DFCm [ETX]
Queries the display mode of the display tube.
[STX] QDM [ETX]
[STX] DMSd:m:n [ETX]
Queries the time display mode setting.
[STX] QDO [ETX]
[STX] LDOdata1:data2 [ETX]
Queries the setting of the start and end times when the
control signals are to be output to the component connected
to the EXT TIMER OUT terminal.
[STX] QDP [ETX]
[STX] DPPmm [ETX]
Queries the display position setting for the monitor screen.
[STX] QDS [ETX]
[STX] LDSm [ETX]
Queries the selection of the mode (field or frame) for
performing still-picture playback.
[STX] QDW [ETX]
[STX] LDWm [ETX]
Queries the setting for how the control signals are to be
output to the component connected to the WARNING/REC
OUT terminal.
[STX] QDX [ETX]
[STX] LDXm [ETX]
Queries the setting to switch the EXT SW IN/VIDEQ QUT
connector function.
[STX] QFS:nn [ETX]
[STX] LFSnn;mmdd:p [ETX]
Queries the free-set timer setting.
[STX] QHI [ETX]
[STX] HTIm [ETX]
Queries the operation mode that is to be established when
a tape has been inserted.
[STX] QHJ [ETX]
[STX] HEm [ETX]
Queries the setting for the operation that is to be
established when the EJECT button is pressed.
[STX] QHL [ETX]
[STX]HRLm [ETX]
Queries the lock mode setting for operations during
recording.
[STX] QHR:H [ETX]
[STX] HTRdaia [ETX]
Queries the remaining tape amount.
[STX] QHT [ETX]
[STX] HREm [ETX]
Queries the setting for the operation mode that is to be
established (during recording) at the tape-end position.
[STX] QIC [ETX]
[STX] 1 [ETX]
Queries the product area identification code.
[STX] QID [ETX]
[STX] data [ETX]
Queries the ID code of the unit.
61