Alarm search, Alarm recording section search), Notes – Panasonic AG-DTL1P User Manual

Page 27: Useful functions, Search playback (cue/review)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Useful functions

Search playback (cue/review)

o □ O GDCDCpGD cam

@ @

C3 ^ CS CS eK<S

□ D

X

Set the POWER switch to ON, and insert the

cassette tape.

2

Press the PLAY button to start playback.

3

Press the FF button or REW button.

The unit performs search playback (cue or review)

while the FF button or REW button is held down.

Normal playback is restored when the FF button or
REW button is released.

<Notes>

• When search playback is performed with a tape

which was fra me-recorded using cameras No. 13 to

16, the recorded images of all the cameras are

mixed and output even if a particular camera is
selected.

• The picture will become quite blurred when search

playback is performed for a tape which was field-

recorded in the standard picture quality mode. This

is normal and not indicative of malfunctioning.

Alarm search
(alarm recording section search)

c

7

“AS” lights.

o

=

=

a

El

GH

GH

GD

rara

° @ @ tH3(H3CSDC3

»-a

30

D □

2

Set the POWER switch to ON, and insert the

cassette tape containing the alarm recording.

2

Press the COUNTER button to establish the

counter display mode.

3 Press the SEARCH button.

Check that “AS” lights on the display tube and that

the alarm search mode is established.

Press the SEARCH button again if “M” has lighted.

4

While the unit is in the stop, fast forward or rewind

mode, press the REW or FF button.

The first alarm recording section is searched in the

direction corresponding to the button pressed, and
the unit is set to the still-picture playback mode.

5

To play back the section, press the PLAY button.

<Notes>

• To release the alarm search mode, press the

SEARCH button again to clear “AS" from the
display tube.

• The alarm search function can be used to search

for only those alarm recording sections which were
recorded for more than 30 seconds in the 3-hour, 9-
hour, 12-hour, 18-hour or 24-hour recording time
mode.

• When the FF button or REW button is pressed

during playback, search playback (cue or review) is
initiated, and even when the button is released,

search playback will continue if the unit is in the
alarm search mode.

27

Advertising