Panasonic AG-DTL1P - Manual (Page 34)

Useful functions
When using an external timer connected to the
terminal section on the unit’s rear panel (control
exercised at the EXT TIMER connector)
7 4 ‘EXr’ lamp
3*6
1 Connect the external timer to the terminal section
on the unit’s rear panel, and turn on its power.
2 Set the unit’s POWER switch to ON, and insert the
cassette tape.
2 Set the PROGRAM switch to the MENU position.
The setting menu screen now appears on the TV
monitor.
/ Press the TIMER MODE button on the front panel
and set it to the external timer recording mode (the
“EXT lamp lights on the display tube).
The power is automatically turned off, and the unit
waits for the control signal to be sent from the
external timer.
<Notes>
• If the cassette tape has not been inserted or its
accidental erasure prevention tab has been
broken out, the buzzer will sound, and the EXT
lamp will flash.
• To release the external timer recording mode,
press the TIMER MODE button to turn off the
EXT lamp on the display tube.
S
Set the external timer.
Recording will start automatically when the unit’s
power is turned on by the control signal sent from
the external timer.
Press the PAGE (+) or PAGE (-) button to display
the P7 TERMINAL INPUT SELECT screen.
The flashing items are ones that can be set.
[TERMINAL INPUT SELECT] P7
EXT TIMER IN OFF
TIME ADJUST IN 9:00
[TERMINAL OUTPUT SELECT]
ALARM/SENSOR OUT CONTINUE
ERROR WARN/REC OUT WARNING
EXT TIMER OUT START 0:00
END 0:00
[VIDEO OUT SEQUENCE]
SW INTERVAL 2S
BYPASS CAMERA OFF
BLACK MATTE OFF
LL CAMERA OFF
[EXT SWITCHER]
MODE VIDEO OUT
Use the ( T ) and ( A ) SHIFT buttons to move the
flashing part to the EXT TIMER IN item, and press
the (+) and (-) SET buttons to select ON as the
item’s setting.
Upon completion of the settings, set the
PROGRAM switch to the OFF position.
The setting menu screen is cleared from the TV
monitor, and the normal mode is restored.
34