Panasonic AG-DTL1P - Manual (Page 64)

RS-232C
Communication control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] RAF [ETX] [STXl RAF (ETX] Disables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RAN [ETX] [STX] RAN [ETX] Enables the return of the ACK (acknowtedge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RCK [ETX] [STX] RCK [ETX] Checks whether communication has been established.
<Note>
This command is not acknowledged while a search control
command is being processed.
[STX] RSE:m [ETX]
Parameter
m =
0: Normal
1: No command when search is
completed
2: No command when search is
completed/when error is
discovered
[STX] RSE [ETX] Sets the timing at which the search completion command is
to be sent and sets the enabling/dlsabling of the
transmission.
• When “normal" is selected
When search is started: ACK code is returned.
When search is completed: [STX]DnD[ETX] is
returned.
When search is suspended: [STX]ERDnD[ETX] is
returned.
• When “no command when search is completed" is
selected
When search is started: [STX]nnD[ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: [STX]ERQDn[ETX] is
returned.
• When “no command when search is completed/when
error is discovered” is selected
When search is started: [STXjnn n[ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: No return
<Note>
This command is not acknowledged while a search control
command is being processed.
64