Rs-232c parameters screen, User id rec screen, Rs-232c parameters screen user id rec screen – Panasonic AG-DTL1P User Manual
Page 52: Setting menus, Menu page p10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting menus
Menu page P10
[RS-232C PARAMETERS]
P10
BIT LENGTH
7bit
STOP BIT
STOP-1
PARITY
ODD
BAUD HATE
9600
[USER ID REC]
OOOOCKKH)
RS-232C PARAMETERS screen
The RS-232C parameters are set on this screen.
Menu item
Description of function
BIT LENGTH
For setting the bit length.
7bit. 8bit
STOP BIT
For setting the stop bit.
STQP-1. STOP-2
PARITY
For setting the parity.
ODD. EVEN, NON
BAUD RATE
For setting the communication speed (bps).
1200,2400, 4800. 9600. 19200
The underlining indicates the factory mode setting.
USER ID REC screen
Menu item
Description of function
The user ID (max. 8 alphanumerics) is set on this screen.
By setting the user ID here, it will be recorded onto the recording
tape.
<Note>
The following 16 alphanumerics can be used.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
52