Rs-232c, Video control command – Panasonic AG-DTL1P User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RS-232C
Video control command
These commands are not acknowledged while a search control command is being processed.
Data transmitted by
PC
Data returned from unit in response
Description of command
[STX] VMD:m [ETX]
Parameter
m = A; AUTO
Color and monochrome are
switched automatically in
accordance with the input
signals.
B: B/W
Monochrome is forcibly set.
[STX] VMD [ETX]
Sets the color ot the video output signals.
[STX] VNR:m [ETX]
Parameter
m = C: CAMERA
Video signals supplied from
the cameras
B: BLUE BACK
Blue background signals
[STX] VNR [ETX]
Sets the video signals (video signals from the camera and
blue background signal) to be output to the monitor screen
in all modes except the recording mode.
[STX] VVC [ETX]
[STX] VVC [ETX]
Switches the cameras
in
sequence to
detect
whether video
signals are input to CAMERA IN connectors []] through [i||.
Signals cannot be detected when the POWER switch is at
OFF.
The detection results are checked using the OVC
command.
.
74