A&D Weighing AD-4406 - Manual (Page 25)

AD-4406 Weighing Indicator Page 23
Display and Other General Settings
Item
Parameter
Description
* 0 5 times/s F04
Display update rate
1 10 times/s
The selection for the unstable
condition.
1 x Key click ( ON/OFF )
2 x LoLo /Zero band
3 x LO
4 x OK
5 x HI
F05 [Type2]
Buzzer
6 x HiHi/Batch finish/Full
Left: Item, select using the key
Right: parameter, select using the
1 key
0: no sound, 1: continuous
2: 4 times/s, 3: 2 times/s
4: 1 time/s,
5: 1 time/2s
Initial value is 11, others x0
F06
Device ID (Address) 00 to
99
Command address
or Device ID
Initial setting is 00.
* 0 Not automatically off F07
Auto power off
1 5 minutes
Stable and not using for 5 min.,
automatically power off.
s: second. *: Initial settings.
Key Switch
Item
Parameter
Description
x 0 No function
x 1 Serial data output 1
x 2 Serial data output 2
x 3 Accumulation (M+)
x 4 "totAL" display
x 5 Setting setpoint
x 6
Start comparator,
batch
x 7
Stop comparator,
batch
x 8 Stop buzzer sound
x 9 Unit change
F10 [Type2]
F1 key function
x A Hold start / release
Left: Priority, select using the
1 key
Right: Function (listed), select
using the key
The first priority is operated by
pressing and releasing the key
quickly, pressing the key for
more than two seconds, lower
priority functions are displayed
sequentially.
Initial value is 13, others x0
F11 [Type2]
F2 key function
same as F10 Initial value is 11, others x0
2 0
F12 [Type2]
Disabling keys
A key is selected by the left
parameter
A key condition is selected by
the right parameter:
When specifying 1 at the right
parameter, this key does not
work.
Use the function to avoid
unintentional operation of 6
keys in the table at the left.
*: Initial settings
*
0 enable
1 disable
key
1 ZERO key
2 TARE key
3 NET/GROSS key
4 F1 key
5 F2 key
6 ON/OFF key
key
6.2. F-Functions