A&D Weighing AD-4406 - Manual (Page 35)

AD-4406 Weighing Indicator Page 33
9.2. Display and Operation
Action of Accumulating Data
When accumulating data, the display blinks once.
If the accumulated data is stored, the M+ mark is displayed.
Caution This function can not accumulate data with a different unit. Specify a
unit before use.
Display of Accumulated Data
When setting to CF08 1 (Effective accumulation function) and pressing the key that
allows accumulation display, totAL is displayed and the total data is displayed
with the M+ mark blinking. Pressing the TARE key alternatively displays the
accumulated data and the accumulation count.
Pressing the ESC key, the weight data is displayed.
The total data can be output. Refer to "Output of Accumulated Data".
Undoing the Accumulated Data
The last weight data can be deduced from the accumulated data unless new data
has been accumulated.
Step 1 Press the key assigned to operate the function to display totAL and the
accumulated data.
Step 2 Press and hold the +/- key for more than 3 seconds. The display blinks once and
the data accumulated before accumulating the last weight data is displayed.
Caution External input can not be used.
Clearing the Accumulated Data
Step 1 Press the key assigned to operate the function to display totAL and the
accumulated data.
Step 2 Press and hold the ZERO key for more than 3 seconds. The display blinks once
and the accumulated data is cleared.
Caution External input can not be used.
Initializing the Data Number with Clearing the Accumulated Data
When the data number is included with the data of the serial data output, initializing
the data number and clearing the accumulated data can be done at the same time.
Step 1 Press the key assigned to operate the function to display totAL and the
accumulated data.
Step 2 Press and hold the ZERO and +/- keys at the same time for more than 3 seconds.
The display blinks once and the accumulated data is cleared. And the data
number is initialized (1).
Caution External input can not be used.
9. Accumulation