A&D Weighing AD-4406 - Manual (Page 26)

Page 24 AD-4406 Weighing Indicator
External Input
Item
Parameter
Description
* 0 Not used (No function)
1 ZERO key
2 TARE key
3 NET/GROSS key
4 OFF key (Not ON)
5 F2 key
6 F1 key
7 Serial data output (Format 1)
8 Serial data output (Format 2)
9 Accumulation (M+)
10 Start batching
11 Stop batching
12 Over signal. Gross over and displayed data are output.
13 Net weight display when shorting the terminal.
14 Accumulated data display when shorting the terminal.
15 Execute comparison when shorting the terminal
16 Display by the second unit when shorting the terminal.
17 All keys are enabled when shorting the terminal.
18 Inhibit memory code reading when shorting the terminal.
19 Start averaging to hold
F13
EXT1
Function selection of
external input
20 Release holding data
0 - 17, 19 and 20 Same as F-13 F14
EXT2
18 Memory code (BCD 1)
0 - 17, 19 and 20 Same as F-13 F15
EXT3
18 Memory code (BCD 2)
*: Initial settings
Accumulation
Item
Parameter
Description
10/11 Acc. no (0) / Exec (1)
20/21 Manual (0) / Auto (1)
30/31 + only (0) / +/ - (1)
F20 [Type2]
Accumulation Mode
40/41 OK only / All data (1)
Left: Sub item, select using the
1 key
Right: Setting, select using the
1 key
Initial settings: 10,21,31,41
0 Add data anytime
* 1 Above 5 d
2 Above 10 d
3 Above 20 d
F21
Inhibit region for
accumulation
4 Above 50 d
The selection of the inhibit
region for accumulation.
Do not set F21=0 when Auto
accumulation (F20:21)
d: division (weighing interval) of the first range *: Initial settings
6.2. F-Functions