A&D Weighing AD-4406 - Manual (Page 32)

Page 30 AD-4406 Weighing Indicator
7. 7. 7. 7.
Function keys F1 and F2
Function keys F1 and F2 Function keys F1 and F2 Function keys F1 and F2
For easier use, select functions of the F1 key and/or the F2 key and prioritize
them in function settings.
Functions that can be set are as follows:
“Print 1” or “Print 2” for serial data output in either format 1 or 2
“Add” for addition
“totAL” for display of accumulated data
"SEt Pt" for setting the code memory number and compared data
“StArt” for starting comparison or batch weighing
“StoP” for stopping comparison or forced termination of batch weighing
"bU oFF" for stopping the sound of the comparison buzzer
“Unit” for changing the unit
“HoLd” for starting the average or releasing the hold data
The function set as first priority will operated when the F1 or F2 key is released
and the functions of other priority, by pressing either the F1 or F2 key for more
than 2 seconds. For further details, refer to each item’s description.
Also, regardless of the function settings above, by pressing both the F1 and F2
keys or pressing one key while holding the other key, the following functions can be
done.
F1 + F2 Entering function settings
F1 + NET/GROSS Displaying the accumulated data
F2 + NET/GROSS Displaying and setting data number
F2 + TARE Starting batch-weighing
F2 + ON/OFF Changing the unit
7. Function keys F1 and F2