A&D Weighing AD-4406 - Manual (Page 28)

Page 26 AD-4406 Weighing Indicator
Data Output
Item
Parameter
Description
* 0 No data output
1 Analog output Set F31, 32, 33
2 Serial output
F30
Data output
3 Serial output (Zero suppressing)
RS-232C,
RS-422/485
*: Initial settings (In case of installing RS-232C, F30 is set to 2. )
Analog Output
Item
Parameter
Description
* 0 Displayed data
1 Gross data
F31
Output data
2 Net data
F32
Weight value at 4 mA output -999999 to 999999
(Initial setting is 0)
F33
Weight value at 20 mA output -999999 to 999999
(Initial setting is 10000)
Polarity is changed
by pressing the +/-
key.
*: Initial settings
Serial Data Format
Item
Parameter
Description
x 0 Terminator
x 1 Device ID (selected at F06)
x 2 Code number
x 3 Data number
x 4 Result of comparison
x 5 (Reserved)
x 6 (Reserved)
x 7 Accumulated value
x 8 Accumulation count
x 9 Stable/Over
x A Displayed weight
x B Gross weight
x C Net weight
x D Tare weight
x E Weight type (G /N / T, refer to CF06)
F34
Serial data format 1
Initial value
19
ጝ ,2E ጝ ,3A,4F,E50
F35
Serial data format 2
Initial value
17,2F,E30
x F Weight unit (refer to CF07)
100,10:order of
output (1-999)
Select with the
1 1
key.
1: output data
Select with the
key.
"Exxx" indicates
the end of data to
output.
Press NET/GROSS
to expand or shorten
the output data length.
1 “
ጝ” (right hand of the figure) of the display indicates that the comma (F46=0, semi-colon
for F46=1) is output after the data. To turn this mark on and off, press the ZERO and
TARE keys at the same time.
Output of initial settings of F34 (19 ጝ, 2E ጝ , 3A, 4F, 50) is like “ST,GR,12345.6kg”.
2 The data number (parameter 3) increments automatically with each serial data output
from 1 to 99999 (the next of 99999 is 1). The starting number can be set by the keys (F2
+ NET/GROSS).
6.2. F-Functions