A&D Weighing AD-4406 - Manual (Page 59)

AD-4406 Weighing Indicator Page 57
Current Loop Output
The current loop output can be used to output data to an A&D printer and a display unit.
The current loop output is of the passive type and requires an external current source of
20 mA current. A&D’s printer and display unit can be connected without an external
power source, because they supply the current.
The output terminals do not have a polarity. Each output terminal can be connected to
either the plus or minus inputs of the peripheral unit.
Data Format
The data format is the same as that of the initial setting of F34 of RS-232C data format.
The current loop output data format is fixed and can not be changed.
Header 2 and the unit selection are common to RS-232C (CF06, CF07).
17. Current Loop Output (OP-08)
ᎊᎨᎹᎹᎰᎨᎮᎬ፧ᎹᎬᎻᎼᎹᎵ፧፯፷ᎋᎯ፰ ᎊᎨᎹᎹᎰᎨᎮᎬ፧ᎹᎬᎻᎼᎹᎵ፧፯፷ᎋᎯ፰ ᎊᎨᎹᎹᎰᎨᎮᎬ፧ᎹᎬᎻᎼᎹᎵ፧፯፷ᎋᎯ፰ ᎊᎨᎹᎹᎰᎨᎮᎬ፧ᎹᎬᎻᎼᎹᎵ፧፯፷ᎋᎯ፰
ᎊᎍ፷፽ᎄ፷፳፸፧ ፧ ᎊᎍ፷፽ᎄ፹ ᎊᎍ፷፾ᎄ፷፧ ፧ ፧ ᎊᎍ፷፾ᎄ፸
፹፧ᎫᎰᎮᎰᎻᎺ፧ ፧ ፺፧ᎫᎰᎮᎰᎻᎺ
Header 1 Header 2 Unit
8-digit data Terminator
T S , S G + , 0 0 0 0 0 0 . g k
T S
S U
L O
G
N
T
S G
T N
R T
g
t
g k
g
t
g k
l t
b l
l t
b l
z o
y c
z o
y c
᎚ᎷᎨᎪᎬ፧ᎪᎶᎫᎬ፧፯፹፷Ꭿ፰ ᎚ᎷᎨᎪᎬ፧ᎪᎶᎫᎬ፧፯፹፷Ꭿ፰ ᎚ᎷᎨᎪᎬ፧ᎪᎶᎫᎬ፧፯፹፷Ꭿ፰ ᎚ᎷᎨᎪᎬ፧ᎪᎶᎫᎬ፧፯፹፷Ꭿ፰
᎓ᎰᎵᎬ፧ᎭᎬᎬᎫ፧፯፷ᎈᎯ፰ ᎓ᎰᎵᎬ፧ᎭᎬᎬᎫ፧፯፷ᎈᎯ፰ ᎓ᎰᎵᎬ፧ᎭᎬᎬᎫ፧፯፷ᎈᎯ፰ ᎓ᎰᎵᎬ፧ᎭᎬᎬᎫ፧፯፷ᎈᎯ፰