Syslog configuration, Syslog, Configuration – Comtrol ES7510 User Manual
Page 112
112 - SysLog Configuration
RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
SysLog Configuration
The System Log provides the system administrator ES7510 events history. There are two System Log modes
provided by the ES7510, Local mode and Remote mode.
When enabling Local or Both modes, you can monitor the system logs in the Monitor and Diag /Event Log
page.
PoE Powering Event
Warning is sent when…..
Enable
The PoE port is powering.
Disable
The PoE port is not powering.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES7510 is powered off.
Warning - SysLog Configuration Page
Syslog Mode
There are two system logs available:
•
Local Mode: The ES7510 prints the events that have been
selected in the Event Selection page to the System Log table of
the ES7510. You can monitor the system logs in the Monitor
and Diag /Event Log page.
•
Remote Mode: Assign the IP address of the System Log
server. The ES7510 sends the events that occurred in the
selected in Event Selection page to System Log server that you
assign.
•
Both: This enables both Local and Remote modes.
Remote IP Address
The IP address of the System log server.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to
maintain these settings if the ES7510 is powered off.