Comtrol ES7510 - Manual (Page 122)

122 - Save to Flash RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
Save to Flash
The Save Configuration pages allows you to save any configuration you made to the flash.
Powering off the switch without clicking Save Configuration causes loss of the new settings. Applying
changes on web user interface pages do not save the changes to the flash.
After selecting Save Configuration, click Save to Flash to save your new configuration.
Optionally, you can use the CLI, see Saving to Flash (CLI) on Page 178.
Logout
The ES7510 provides two logout methods.
• The CLI connection logs out of configure terminal mode, if you do not input any command after 30
seconds.
• The Logout option in the web user interface allows you to manually logout the web connection.
Click Yes to logout, No to remain the web user interface.
Optionally, you can use the CLI, see Logging Out (CLI) on Page 178.