Comtrol ES7510 - Manual (Page 48)

48 - Backup and Restore RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
Backup and Restore
Use the Backup option to save the current configuration saved in
the ES7510 flash to a PC/laptop or a TFTP server.
This allows you to use the Restore option to restore a
configuration file back to the ES7510 or load the same settings to
another ES7510. Before you can restore a configuration file, you
must save the backup configuration file in the PC or TFTP server.
The ES7510 then downloads this file back into the flash.
The ES7510configuration file is a standard text file. You can open
the file with Word or Notepad. You can also modify the file, add/
remove the configuration settings, and then restore the file back to
the ES7510.
There are two modes to backup and restore the configuration file:
• Local File
- Backup the Configuration - Local File Method on Page 49
- Restore the Configuration - Local Method on Page 50
• TFTP Server
- Backup the Configuration - TFTP Server Method on Page 51
- Restore the Configuration - TFTP Server Method on Page 54
You can use the Local File method if you have a Windows XP system.
If you have Windows Server 2003 through Windows 7, you must use the TFTP Server method to backup or
restore configuration files.
DHCP Option82 Relay Agent
Circuit-ID
Default: Default value of the Circuit-ID.
Port: Port of the ES7510.
Circuit ID: Custom of the Circuit-ID.
Remote-ID
Default: Default value of the Remote-ID
IP Address: IP Address of the Switch
Remote ID: Custom of the Remote-ID
Backup & Restore Page
Backup
Configuration
• Local File: The ES7510 acts as the file server in Windows XP. Other Windows
operating systems must use the TFTP method. This mode is only provided by the
web user interface as the backup and restore functions are not supported by the CLI.
For procedures, see
Backup the Configuration - Local File Method on Page 49.
• TFTP Server: The ES7510 acts as a TFTP client. This mode can be used in both the
CLI and web user interface. For procedures, see
Backup the Configuration - TFTP
Server Method on Page 51.
Note: Pointing to the wrong file causes the entire configuration to be skipped.
Backup Backup can only backup the configuration file to your PC or a TFTP server.
Restore
Configuration
You can select local file in Windows XP or TFTP server in all Windows operating systems
to restore the startup configuration. For procedures, see
Restore the Configuration - Local
Method on Page 50 or Restore the Configuration - TFTP Server Method on Page 54.
Restore Click to restore ES7510 startup configurations to the ES7510.
DHCP Relay Agent Page (Continued)