Loop protection – Comtrol ES7510 User Manual
Page 81
RocketLinx ES7510 User Guide: 2000544 Rev. B
Loop Protection - 81
Configuration Using the Web Interface
Loop Protection
Loop protection prevents broadcast loops in Layer 2 switching configurations.
Loop Protection Page
Transmit Interval
Loop protection mechanism detection packet transmitting interval
1 ~ 10 seconds (default is 1).
Port
The port ID.
Loop Protection
Enable/Disable loop protection mechanism on port.
Status
The status of loop protection.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to
maintain these settings if the ES7510 is powered off.
Enable/Disable All
Click the Enable/Disable All button to enable or disable all ports
and then click Apply button to apply.
Reload
Click the Reload button to reload loop protection information.