Comtrol ES7510 - Manual (Page 20)

20 - Uploading a Configuration File RocketLinx ES7510 User Guide: 2000544 Rev. B
Initial Configuration Using NetVision
5. Click the Backup button.
Uploading a Configuration File
Before you can restore a configuration file, you must have saved the backup configuration file using Windows
XP. To restore a configuration file on an operating system later than Windows XP, go to
Restore the
Configuration - TFTP Server Method on Page 54 or Backup and Restore on Page 140.
Note: If you are using an operating system later than Windows XP you must have created a backup file using
TFTP with the web user interface ( Backup the Configuration - TFTP Server Method on Page 51) or the
CLI ( Backup and Restore on Page 140.).
The ES7510configuration file is a standard text file. You can open the file with Word or Notepad. You can also
modify the file, add/remove the configuration settings, and then restore the file back to the ES7510. You can
only load configuration files from the same RocketLinx model.
1. Highlight the ES7510 on to which you want to load the configuration file, right-click, and select Restore.
2. Click the Browse button to locate the backup file.