Comtrol ES7510 - Manual (Page 39)

RocketLinx ES7510 User Guide: 2000544 Rev. B IP Configuration - 39
Configuration Using the Web Interface
IP Configuration
This function allows you to configure the ES7510’s IP address settings.
IP Configuration Page
DHCP Client
You can select to Enable or Disable the DHCP Client function. When the
DHCP Client function is enabled, an IP address is assigned to the switch from
the network’s DHCP server. In this mode, the default IP address is replaced by
the one assigned by DHCP server. If DHCP Client is disabled, then the IP
address that you specified is used.
IP Address
You can assign the IP address reserved by your network for the ES7510. If the
DHCP Client function is enabled, you do not need to assign an IP address to
the ES7510, because it is overwritten by the DHCP server and displays here.
The default IP Address is 192.168.250.250.