Comtrol ES7510 - Manual (Page 9)

RocketLinx ES7510 User Guide: 2000544 Rev. B Hardware Installation - 9
Hardware Installation
You can use the following subsections to install the RocketLinx ES7510:
• Connect the Power and Ground
• Connect the Relay Output on Page 11
• Mount the ES7510 on Page 11
• Connect the Ethernet Ports on Page 11
• LED Descriptions on Page 13
• Panel Layout on Page 14
Connect the Power and Ground
You can use the following procedure to connect power and the ground to the ES7510.
1. Connect the DC power inputs.
a. Insert positive and negative wires (12-24AWG) into the PWR+ and PWR- contacts.
Note: Power should be disconnected from the power supply before connecting it to the switch.
Otherwise, your screw driver blade can inadvertently short your terminal connections to the
grounded enclosure.
Power Supply
48VDC - 57VDC/6A
V+
V-
AC Power Input
Power Supply
48VDC - 57VDC/6A
V+
V-
AC Power Input
12-24 AWG Wire