Mstp information – Comtrol ES7510 User Manual
Page 76
76 - MSTP Information
RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
MSTP Information
This page allows you to see the current MSTP information. Choose the Instance ID first. If the instance is not
added, the information remains blank.
Link Type
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port in question is connected to exactly one other
bridge (that is, it is served by a point-to-point LAN segment), or if it's
connected to two or more bridges (that is, it is served by a shared medium
LAN segment). This configuration allows the p2p status of the link to be
controlled by an administrator.
Edge Port
Present in implementations that support the identification of edge ports. All
ports directly connected to end stations cannot create bridging loops in the
network and can thus directly transition to forwarding, and skipping the
listening and learning stages. When the non-bridge device connects an edge
port, this port is in a blocking state and turn to forwarding state in 2*Hello
Time seconds. When the bridge device connects an edge port, this port is a
non-edge port automatic.
Apply
Click the Apply button to apply the configuration.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES7510 is powered off.
MSTP Port Configuration Page (Continued)