Comtrol ES7510 - Manual (Page 147)

RocketLinx ES7510 User Guide: 2000544 Rev. B Power over Ethernet (CLI) - 147
Configuration Using the Command Line Interface (CLI)
Set PoE Powering Mode
802.3af
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe
budget Configure the power budget of power over ethernet
control-mode PoE control mode
powering-mode PoE powering mode
schedule Configure the schdule of day
type String to indicate the type of powered device
user Port control in user mode
Switch(config-if)# poe powering-mode
802.3af 802.3af powering mode
forced forced powering mode
802.3at 802.3at powering mode
Switch(config)# poe powering-mode 802.3af
Forced Powering
Mode
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe powering-mode forced
802.3at
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe powering-mode 802.3at
Set Control Mode on Port/Schedule
Set PoE Port to
User Mode
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe control-mode
schedule Schedule mode
user User mode
Switch(config-if)# poe control-mode user
Schedule
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe control-mode
schedule Schedule mode
user User mode
Switch(config-if)# poe control-mode schedule