Comtrol ES7510 - Manual (Page 56)

56 - Upgrading Firmware (TFTP Server) RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
6. Click Ok to the Warning Message.
7. Click Ok to close the Success Message.
Note: After the firmware has successfully uploaded, you should close and re-open the browser to clear the Java
Virtual Machine cache.
Upgrading Firmware (TFTP Server)
You can use this procedure to upgrade the firmware (not Bootloader) using Windows operating systems.
1. Open a TFTP server, if necessary, see Start the TFTP Server on Page 51.
2. Place the ES7510 .bin file in the same directory where the TFTP server resides.
3. Disable the Windows firewall, if necessary, see Disable the Windows Firewall on Page 52.
4. If necessary, open the web user interface, open the Firmware Upgrade page in the Basic Settings group.
5. Select TFTP Server in the Firmware Upgrade
drop list.
6. Enter the IP address of the TFTP server, enter the
firmware file name, and click the Upgrade button.
7. Click Yes to the Confirm Dialog message.
8. Click Ok to the Warning Message.
9. Click Ok to close the Success Message.
10. Enable the Windows firewall.
Note: After the firmware has successfully uploaded, you should
close and re-open the browser to clear the Java Virtual
Machine cache.