Comtrol ES7510 - Manual (Page 16)

16 - NetVision Overview RocketLinx ES7510 User Guide: 2000544 Rev. B
Initial Configuration Using NetVision
5. Click the Discovery button. After five seconds the ES7510 and any other managed RocketLinx models
should display.
Go to the Programming Network Information subsection on Page 18 to program the network information.
NetVision Overview
This subsection provides an overview of NetVision and NetVision menus.
You ca n change the order of any column by clicking the column heading. The following graph shows
displaying the RocketLinx switches by IP address.
You can highlight a RocketLinx and use the menus in the table below to perform the following tasks.
v2.3b is the firmware version.
b1.6.2.12 is the Bootloader version.