Upgrading the bootloader – Comtrol ES7510 User Manual
Page 22
22 - Upgrading the Bootloader
RocketLinx ES7510 User Guide: 2000544 Rev. B
Initial Configuration Using NetVision
Upgrading the Bootloader
Use the following procedure to upload the latest ES7510 Bootloader into the RocketLinx. You cannot use the
web user interface or CLI to upload the Bootloader.
1.
Locate and download the Bootloader by selecting the Software page that corresponds to your RocketLinx
switch by accessing the
Comtrol FTP site
.
2.
Highlight the ES7510 switch (or several ES7510 switches) and note the version,
which is displayed in parenthesis.
3.
Right-click and select Boot Loader Upgrade.
4.
Browse to the location of the firmware file, select the file, and click
Upgrade.
5.
Click Discovery to update the display.
6.
Verify that when the Status field is empty, that the version number
matches the new version number.