YSI MultiLab 4010-3 - Manual (Page 120)

What to do if... MultiLab 4010-3
120 ba76143e03 08/2013
Data transmission to
USB printer does not
work
Error message,
Memory error 1
Time gets lost
Cause Remedy
– The USB-B interface is connected to
a PC
– Connected USB memory device
does not work
– Disconnect the PC from the
USB-B interface
– Use a suitable USB printer (see
section 12.4 C ONNECTING A USB
MEMORY DEVICE /USB PRINTER
(USB-A INTERFACE (USB
H OST )), page 109)
– Check printer settings (see sec-
tion 12.4 C ONNECTING A USB
MEMORY DEVICE /USB PRINTER
(USB-A INTERFACE (USB
H OST )), page 109)
Cause Remedy
– Instrument storage was not found – Please contact the service.
Cause Remedy
– Buffer battery is empty – Change the buffer battery (see
section
13.1.1 G
ENERAL MAINTE
-
NANCE ACTIVITIES , page 112)