YSI MultiLab 4010-3 - Manual (Page 90)

Settings MultiLab 4010-3
90 ba76143e03 08/2013
Calibration /
Calibration data stor-
age /
Display - Displays the calibration
record.
Further options:

Scroll through the cali-
bration records with
<><>.
 Output the displayed cal-
ibration record to the
interface with <F2>/
[USB-Ausgabe].
 Output all calibration
records to the interface
with <F2_>[USB-Aus-
gabe].
 Quit the display with
<F1>/[Back] or
<ENTER>.
 Switch directly to the
measured value display
with <M>.
Calibration /
Calibration data stor-
age /
Output to RS232/
USB - Outputs the calibration
records to the interface.
Man. temperature -25 ... +25 ... +130 °C Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
Alternative tempera-
ture on
off Takes the measured tem-
perature value from an IDS
sensor.
This menu item is only avail-
able if an IDS adapter and
an IDS sensor with temper-
ature sensor are connected.
Temperature from
channel ▭▭▬
▭▬▭
▬▭▭
Selection of the channel
from which the temperature
value should be taken over.
This menu item is only avail-
able if two IDS sensors are
additionally connected.
ISE setup /
AutoRead criterion low
medium
high Selection of the AutoRead
criteria (see section 7.1.1
M
EASURING THE ION CON -
CENTRATION
, page 47).
Menu item Possible setting Description