3 selecting the measuring method, Selecting the measuring method – YSI MultiLab 4010-3 User Manual
Page 56
Ion concentration
MultiLab 4010-3
56
ba76143e03
08/2013
7.3
Selecting the measuring method
The following methods are supported:
Standard addition
Standard subtraction
Sample addition
Sample subtraction
Blank value addition
1.
Connect the ISE combination electrode to the meter.
The pH/ISE measuring window is displayed.
2.
If necessary, select the ISE display with <M>.
3.
If necessary, measure the temperature of the test sample with a ther-
mometer.
4.
Open the ISE menu with <ENTER>.
5.
Thoroughly rinse the electrode with distilled water.
6.
Adjust the temperature of the standard solutions.
7.
Select Method with <> <> and confirm with <ENTER>.
8.
Select a method with <> <> and confirm with <ENTER>.
9.
Select Start method with <> <> and confirm with <ENTER>.
Measurement with the selected method begins (see section 7.3.1
S
Calibration
Man. temperature
:
25 °C
ISE setup
Method
:
Standard addition
Start method
ISE
01.08.2013 08:00