YSI MultiLab 4010-3 - Manual (Page 93)

MultiLab 4010-3 Settings
ba76143e03 08/2013 93
Calibration / Calibra-
tion data storage /
Display - Displays the last calibration records
(max. 10)
Calibration / Calibra-
tion data storage /
Output to USB flash
drive or printer - Outputs the stored calibration data to
the USB-A interface (USB memory
device/USB printer)
Calibration /
Calibration data stor-
age / Output to
RS232/USB - Outputs the stored calibration data to
the USB-B interface (PC)
Calibration /Calibra-
tion interval 1 ... 150 ...
999 d Calibration interval for the IDS con-
ductivity sensor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor sym-
bol in the measuring screen.
Type Used measuring cell
Cal Measuring cells whose cell constant
is determined by calibration in the KCl
control standard solution.
Calibration range:
0.450 to 0.500 cm
-1
The currently valid cell constant is dis-
played in the status line.
man Freely adjustable cell constant in the
range 0.450 ... 0.500 cm
-1
.
Man. cell const. 0.450 ...
0.475 ...
0.500 cm
-1
Display and setting options for the cell
constant.
Temp. comp. (TC) /
Method nLF
lin
off Procedure for temperature compen-
sation (see section 9.2 T
EMPERATURE
COMPENSATION
, page 80).
This setting is only available for the
measured parameters,
ϰ and ρ.
Temp. comp. (TC) /
Linear coeff. 0.000 ...
2.000 ...
3.000 %/K Coefficient of the linear temperature
compensation.
This menu item is only available when
the linear temperature compensation
is set.
Temp. comp. (TC) /
Reference temp. 20 °C
25 °C Reference temperature
This setting is only available for the
measured parameters,
ϰ and ρ.
Multiplier for TDS 0.40 ... 1.00 Factor for TDS value
Menu item Possible
setting Explanation