Cino FA470 - Manual (Page 142)

Command Descriptions
2-127
Parameter(s)
< Table 6-3-1 > Set FS Operation Parameter(s) Field (Continued)
Parameter / PID / Size Options Descriptions
1D Barcode Inverse Reading
PID : 02h 00h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
Dollar Sign Control
PID : 02h 01h
Size : 00h 01h (1 Byte)
- 00h
- 80h
- A2h
- A3h
- A5h
Output as “$” *
Output as “€“
Output as “¢“
Output as “£“
Output as “
￥”
Redundancy
PID : 02h 02h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
- 03h
- 04h
- 05h
None
1 time *
2 times
3 times
4 times
5 times
Data Transmission Packet
PID : 02h 04h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
UPC/EAN Security Level
PID : 02h 06h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
Level 0
Level 1 *
Level 2
Supplement Scan Voting
PID : 02h 08h
Size : 00h 01h (1 Byte)
- 00h
- 06h
- 08h
- 0Ah
- 0Ch
- 0Eh
- 10h
- 12h
- 14h
- 16h
- 18h
- 1Ah
- 1Ch
- 1Eh
None
Level 1
Level 2
Level 3 *
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
Level 11
Level 12
Level 13
Operation Mode
(FM480 & SM380 series)
PID : 20h 00h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
- 04h
- 06h
Trigger mode (External triggering) *
Force mode (Continued power on)
Presentation mode (Auto Detection)
Level mode (Auto power off)
Alternative mode (Periodic power off)
NG Message Output
PID : 20h 04h
Size : 00h 10h (16 Bytes)
1
st
~16
th
Byte
- 00h 00h…00h
- 02h 4Eh 47h
00h…00h
- XXh XXh...XXh
Disable * (Totally sixteen “00h”s)
Output “NG” (Totally thirteen “00h”s)
(See Note under the table)
Output User-defined message
. Note
NG Message Output carries 16 bytes in the Options Field. The 1st byte which indicates the length of
the message is followed by the message characters. If the desired ASCII characters for setting the
message are shorter than 15 bytes, the rest bytes should be set to 00h . For example, to output “BAD”,
the 1st byte is 03h (length of “BAD”), the 2
nd
to 4
th
byte is 42h 41h 44h (ASCII value of “BAD”), and from
the 5
th
byte to the 16
th
byte are all 00h.