Cino FA470 - Manual (Page 2)

Revision History
Rev. 01 April 1, 2013
Merged all the CMD Manuals of different series into one Manual
Added command TS A Operation Mode
Flash, Force, Toggle, and Diagnostic Mode in TS Operation Mode
are available for L series from now on.
Change the parameter name of “Inverse Reading” to “1D Barcode
Inverse Reading” in Operation
Added LED Illumination, Illumination Delay Duration in Operation.
Added Parameters for TS Operation including Operation Mode
(Tethered A Series), Hand-Held Mode Illumination & Aiming Control,
Hand-Free Mode Decode Aiming Control, Aiming Control, Delay
Aiming Timeout, Presentation Background, Center Alignment, Mobile
Phone Capture, Unique Barcode Reporting.
Modified parameter Code 128 Settings in Symbology
Added parameters for Symbology, including GS1-128, code 16k,
code 49, QR code, Data Matrix, Maxicode, Aztec, Chinese Sensible,
Australian post, US Planet, US Postnet, British post, Japan post,
Netherlands KIX code, Intelligent mail.
Rev. 02 August 16, 2013
Added parameters for Transmission, including Data Script Active
Setting, Data Script Setting, Security Script Setting and Data Wizard
Premium Error Message.
Added Security Check
Rev. 03 March 25, 2014
Added command BT A Operation Mode
Added command FS A Operation Mode
Added Auto Power Off Timeout and Bluetooth Device Name
(Bluetooth A Series) in Bluetooth
Added parameters for FS Operation and BT Operation, including
Operation Mode (FA470 & SM5700 Series), Operation Mode
(Bluetooth A Series), Hand-Held Mode Illumination & Aiming Control,
Hand-Free Mode Decode Aiming Control, Aiming Control, Delay
Aiming Timeout, Presentation Background Lighting, Center Alignment
and Mobile Phone Capture.
Rev. 04 April 25, 2014 Page 2-17: Modified “LED Status” parameter in Action
Rev. 05 June 3, 2014 Page 1-4: Modified Status description in Command Structure