Cino FA470 - Manual (Page 54)

Command Descriptions
2-39
Remote Clear
(WF)
Descriptions
Clear the remote message
The scanner will beep twice and vibrate for 100 milliseconds at the same time.
Available for F & L series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 80h 90h 02h 00h 02h 00h
00h 00h 00h 08h
00h 00h … 00h
18h 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes 512 Bytes 1 Byte 1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will be sent
to the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”