Cino FA470 - Manual (Page 91)

Command Descriptions
2-76
Parameter(s)
< Table 5-5-1 > Set Bluetooth Parameter(s) Field
Parameter / PID / Size Options Descriptions
Bluetooth Device Name
(F & L Series)
PID : 00h 00h
Size : 00h 11h (17 Bytes)
- 00h FFh…FFh
(sixteen “FFh”s)
- XXh XXh…XXh
Default * (For example: F680BT-012E)
User defined
(See Notes)
Bluetooth PIN Code
PID : 00h 01h
Size : 00h 09h (9 Bytes)
- 30h…30h 00h
(eight “30h”s)
- XXh XXh…XXh
Defaults to “00000000”
User defined
(See Notes)
BT Authentication
PID : 00h 02h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable
Enable *
Sleep Timeout Control
PID : 00h 03h
Size : 00h 02h (2 Bytes)
1
st
Byte
- 00h
- 06h
- XXh
2
nd
Byte
- 00h
- 01h
- XXh
Sleep Timeout of Connect State
Never enter sleep mode
6 (x5) minutes *
User defined 0~99 (x5) minutes
Sleep Timeout of Disconnect State
Never enter sleep mode
1 minute *
User defined 0~99 minutes
Link Supervision Timeout
PID : 00h 04h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h - 03h
- 04h 1 s
3 s *
5 s 7 s
9 s
HID Link Quality Setting
PID : 00h 05h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable
Enable *
Bluetooth Power Saving Mode
PID : 00h 06h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
Variable PIN Code
PID : 00h 07h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
. Notes
1. User Defined Bluetooth Device Name (F & L Series) can be set to a 16-character name, the device
name should be followed by a 00h . If the device name is less than 16 characters, the rest should be
set to FFh. For example, if you want to set the name to “BT-1”, this parameter should be “42, 54, 2D,
31, 00, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF”
2. User Defined Bluetooth PIN Code can be set to an 8-character name, the PIN Code should be
followed by a 00h . If the PIN Code is less than 8 characters, the rest should be set to FFh. For
example, to set PIN code to “1234”, this parameter should be “31, 32, 33, 34, 00, FF, FF, FF, FF”