Cino FA470 - Manual (Page 48)

Command Descriptions
2-33
Paging
(WF)
Descriptions
Paging the scanner
This command is helpful for you to locate the connected Wi-Fi scanner.
Available for F & L series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 80h 90h 01h 00h 00h 00h <Null> 5Ch 04h 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes 0 Byte 1 Byte 1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will be sent
to the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Parameter(s) Field
Store Configuration command takes no parameters, so the Parameter(s) field is null.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
Serial Command
Paging the scanner
0x7e 0x80 0x90 0x01 0x00 0x00 0x00
0x5c 0x04 0x7e
. Notes
0x5C 0x04: the escaped value of 0x11.