Cino FA470 - Manual (Page 65)

Command Descriptions
2-50
Send STerm Data
(WF)
Descriptions
This command is used to send Sterm Page Data when works with WaveCentre.
It is sent by the host application to the WaveCentre.
Available for F & L series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 80h 80h 00h 00h Variable Variable Variable 7Eh
1 Byte 3 Bytes 1 Byte 4 Bytes Variable 1 Byte 1 Byte
. Host Requirements
There is no response for this message.
. Parameter
The Page Packet Body
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”