Cino FA470 User Manual
Page 249
Command Descriptions
2-234
.
Notes
1. Data Packet ID: If The Transmission Format is set to “Packet Data” (SETUP->Online Scanning ->
Online Options -> Transmission Format -> Packet Data), the first 4 bytes of the Decode Data
(Chapter 2.2) Command’s Parameter field indicates the Data Packet ID.
2. The following Chart lists all available Code Pages and their 2-byte Hex value.
3. Message Length has at most three bytes. If the first byte is 0xFF, the following two bytes represent
the content length, formatted as High Byte Low Byte. Otherwise, the first byte represents the content
length itself, and the following two bytes will become part of the message content.
4. Message Content uses Little-endian UCS-2 character set. If shorter than 503 bytes, the rest bytes
should be set to
00h
.
437
OEM - United States
B5h 01h
737
OEM - Greek (formerly 437G)
E1h 02h
850
OEM - Multilingual Latin I
52h 03h
852
OEM - Latin II
54h 03h
855
OEM - Cyrillic
57h 03h
857
OEM - Turkish
59h 03h
860
OEM - Portuguese
5Ch 03h
863
OEM - French Canadian
5Fh 03h
865
OEM - Nordic
61h 03h
866
OEM - Russian
62h 03h
932
ANSI/OEM Japanese (Shift-JIS)
A4h 03h
936
ANSI/OEM - Simplified Chinese (GB2312)
A8h 03h
950
ANSI/OEM - Traditional Chinese (Big5)
B6h 03h
1250
ANSI - Central European
E2h 04h
1251
ANSI - Cyrillic
E3h 04h
1252
ANSI - Latin 1
E4h 04h
1253
ANSI - Greek
E5h 04h
1254
ANSI - Turkish
E6h 04h
1255
ANSI - Hebrew
E7h 04h