Cino FA470 - Manual (Page 163)

Command Descriptions
2-148
Parameter(s)
< Table 6-4-3 > Reply BT Operation Parameter(s) Field (Continued)
Parameter / PID / Size Options Descriptions
UPC/EAN Security Level
PID : 02h 06h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
Level 0
Level 1 *
Level 2
Supplement Scan Voting
PID : 02h 08h
Size : 00h 01h (1 Byte)
- 00h
- 06h
- 08h
- 0Ah
- 0Ch
- 0Eh
- 10h
- 12h
- 14h
- 16h
- 18h
- 1Ah
- 1Ch
- 1Eh
None
Level 1
Level 2
Level 3 *
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
Level 11
Level 12
Level 13
Operation Mode
(Bluetooth F & L Series)
PID : 50h 00h
Size : 00h 01h (1 Byte)
- 00h
- 02h
Trigger mode (External triggering) *
Presentation mode (Auto Detection)
Batch Scanning Link Control
PID : 51h 00h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Radio Disable
Radio Enable *
Stored Data Transmission
PID : 51h 01h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
All *
On-cradle
Scan Barcode
Delete Stored Data After
Transmission
PID : 51h 02h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
Field Delimiter
PID : 51h 03h
Size : 00h 01h (1 Byte)
- 00h
- 2Ch
- 20h
- 2Dh
- 2Eh
- XXh
None
<,> *
<SPACE>
<->
<.>
User-defined 00~7Fh
Batch Data Quantity Output
Format
PID : 51h 04h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
As many times as the quantity indicates *
<Quantity><Field Delimiter><Data>
<Data><Field Delimiter><Quantity>
. Warning
If you are using the SmartCradle to communicate with the Scanner, “BT Synchronization” command
should be sent to the scanner after the setting of the “Field Delimiter” to sync the Scanner with the
SmartCradle, so that the settings will take effect immediately.