Reply connected mac – Cino FA470 User Manual
Page 18
Command Descriptions
2-3
Reply Connected MAC
(BT)
Descriptions
List all the connected scanners’ MAC addresses
Reply Connected MAC is sent by the device in response to the Get Connected MAC command.
Available for F, L & A series
Packet Format
Prefix
Opcode
Status
Length
Parameter
LRC
Suffix
7Eh
17h 00h 00h
00h
Variable
(MAC List)
Variable
7Eh
1 Byte
3 Bytes
1 Byte
2 Bytes
Variable
1 Byte
1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will send to
the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field