Set_operation_mode(), Example – Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream User Manual
Page 110
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3
110
VHDL Master BFM
set_operation_mode()
April 2014
set_operation_mode()
This nonblocking procedure sets the operation_mode field for a master transaction that is
uniquely identified by the transaction_id field previously created by the
procedure.
Example
-- Create a master transaction containing 3 transfers.
-- Creation returns tr_id to identify the transaction.
create_master_transaction(3, tr_id, bfm_index,
axi4stream_tr_if_0(bfm_index));
-- Set the operation mode field to nonblocking for the tr_id transaction.
set_operation_mode(AXI4STREAM_TRANSACTION_NON_BLOCKING, tr_id, bfm_index,
axi4stream_tr_if_0(bfm_index));
Prototype
set_operation_mode
(
operation_mode: in integer;
transaction_id : in integer;
bfm_id : in integer;
signal tr_if : inout axi4stream_vhd_if_struct_t
);
Arguments
operation_mode
Operation mode:
AXI4STREAM_TRANSACTION_NON_BLOCKING;
AXI4STREAM_TRANSACTION_BLOCKING; (default)
transaction_id
Transaction identifier. Refer to “
” on page 87 for more details.
bfm_id
BFM identifier. Refer to “
Overloaded Procedure Common Arguments
on page 87 for more details.
tr_if
Transaction signal interface. Refer to “
” on page 87 for more details.
Returns
None