Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream - Manual (Page 145)

VHDL Slave BFM
set_operation_mode()
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3 145
April 2014
set_operation_mode()
This nonblocking procedure sets the operation_mode field for a slave transaction that is
uniquely identified by the transaction_id field previously created by the
create_slave_transaction() procedure.
Example
Note
You would not normally use this procedure within a Slave Test Program.
Prototype set_operation_mode
(
operation_mode: in integer;
transaction_id : in integer;
bfm_id : in integer;
signal tr_if : inout axi4stream_vhd_if_struct_t
);
Arguments operation_mode Operation mode:
AXI4STREAM_TRANSACTION_NON_BLOCKING;
AXI4STREAM_TRANSACTION_BLOCKING (default);
transaction_id Transaction identifier. Refer to “ Overloaded Procedure Common
Arguments ” on page 87 for more details.
bfm_id BFM identifier. Refer to “ Overloaded Procedure Common
Arguments ” on page 87 for more details.
tr_if Transaction signal interface. Refer to “ Overloaded Procedure
Common Arguments ” on page 87 for more details.
Returns None