Set_id(), Example – Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream User Manual
Page 135
VHDL Slave BFM
set_id()
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3
135
April 2014
set_id()
This nonblocking procedure sets the data stream identifier id field for a slave transaction that is
uniquely identified by the transaction_id field previously created by the
Example
Note
You would not normally use this procedure within a Slave Test Program.
Prototype
set_id
(
id: in std_logic_vector(AXI4STREAM_MAX_BIT_SIZE-1 downto 0 )
| integer;
transaction_id : in integer;
bfm_id : in integer;
signal tr_if : inout axi4stream_vhd_if_struct_t
);
Arguments
id
Data stream identifier value placed on the TID signals.
transaction_id
Transaction identifier. Refer to “
” on page 87 for more details.
bfm_id
BFM identifier. Refer to “
Overloaded Procedure Common Arguments
on page 87 for more details.
tr_if
Transaction signal interface. Refer to “
” on page 87 for more details.
Returns
None