Set_config(), Example, Lds that you can set using the – Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream User Manual
Page 48: Slave bfm, use the, Command as shown in
Advertising
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3
48
SystemVerilog Slave BFM
set_config()
April 2014
set_config()
This function sets the configuration of the slave BFM.
Example
set_config(AXI4STREAM_CONFIG_BURST_TIMEOUT_FACTOR, 1000);
Prototype
function void set_config
(
input axi4stream_config_e config_name,
input axi4stream_max_bits_t config_val
);
Arguments
config_name
Configuration name:
AXI4STREAM_CONFIG_SETUP_TIME
AXI4STREAM_CONFIG_HOLD_TIME
AXI4STREAM_CONFIG_BURST_TIMEOUT_FACTOR
AXI4STREAM_CONFIG_LAST_DURING_IDLE
AXI4STREAM_CONFIG_MAX_LATENCY_TVALID_ASSERTION_
TO_TREADY
AXI4STREAM_CONFIG_ENABLE_ALL_ASSERTIONS
AXI4STREAM_CONFIG_ENABLE_ASSERTION
config_val
See “
” on page 44 for more details.
Returns
None
Advertising