Set_valid_delay(), Example – Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream User Manual
Page 141
VHDL Slave BFM
set_valid_delay()
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3
141
April 2014
set_valid_delay()
This nonblocking procedure sets the valid_delay field for a slave transaction that is uniquely
identified by the transaction_id field previously created by the
procedure.
The valid_delay array element is identified by the optional index argument. If no index is
supplied, then the first valid_delay is accessed in the array.
Example
Note
You would not normally use this procedure within a Slave Test Program.
Prototype
set_valid_delay
(
valid_delay: in integer;
index : in integer; --optional
transaction_id : in integer;
bfm_id : in integer;
signal tr_if : inout axi4stream_vhd_if_struct_t
);
Arguments
valid_delay
Valid delay array to store TVALID delays measured in ACLK
cycles for this transaction. Default: 0.
index
(Optional) Array element index number for valid_delay.
transaction_id
Transaction identifier. Refer to “
” on page 87 for more details.
bfm_id
BFM identifier. Refer to “
” on page 87 for more details.
tr_if
Transaction signal interface. Refer to “
” on page 87 for more details.
Returns
None