Get_operation_mode(), Example – Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream User Manual
Page 111
VHDL Master BFM
get_operation_mode()
Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3
111
April 2014
get_operation_mode()
This nonblocking procedure gets the operation_mode field for a master transaction that is
uniquely identified by the transaction_id field previously created by the
procedure.
Example
Note
You would not normally use this procedure within a Master Test Program.
Prototype
get_operation_mode
(
operation_mode: out integer;
transaction_id : in integer;
bfm_id : in integer;
signal tr_if : inout axi4stream_vhd_if_struct_t
);
Arguments
operation_mode
Operation mode:
AXI4STREAM_TRANSACTION_NON_BLOCKING;
AXI4STREAM_TRANSACTION_BLOCKING; (default)
transaction_id
Transaction identifier. Refer to “
” on page 87 for more details.
bfm_id
BFM identifier. Refer to “
” on page 87 for more details.
tr_if
Transaction signal interface. Refer to “
” on page 87 for more details.
Returns
operation_mode