Tascam X-48 - Manual (Page 50)

Recorder
• Click on the Sync tab and click the Control Mode submenu. Choose the desired
control mode from the list.
Front Panel Operation
• Press
the SYNC button. Press the up/down buttons to select Control Mode and
press CHNG.
• Select a control mode from the list using the up/down buttons and press Enter.
Chase Freewheel
Chase Freewheel dictates how far out of sync the SMPTE timecode can drift before the X-
48 drops out of play or record. The choices are 0, 5, 10, 20, 50 or 100 frames. To change the
setting:
Mouse/Keyboard Operation
•
Click the Windows menu and select the Settings window.
• Click on the Sync tab and click the Chase Freewheel submenu. Choose the desired
setting from the list.
Front Panel Operation
• Press
the SYNC button. Press the up/down buttons to select Chase Freewheel
and press CHNG.
• Select a value from the list using the up/down buttons and press Enter.
Chase Relock
If the SMPTE drifts outside of the Chase Relock Threshold window (see next section), this
setting tells the X-48 what to do
:
•
Always tells the transport to shift to the correct timecode value, even if it's in record.
• Only if not recording shifts the transport in play but not in record.
• Never ignores the slight timecode offset.
To change the re-lock setting:
Mouse/Keyboard Operation
•
Click the Windows menu and select the Settings window.
• Click on the Sync tab and click the Chase Relock submenu. Choose a setting from
the list.
50