Tascam X-48 - Manual (Page 53)

Recorder
Mouse/Keyboard Operation (only)
•
Click the Windows menu and select the Prefs window.
• Select the Audio File Naming submenu and choose your preferred naming
convention.
Track Key Punch
The X-48 can be set to enter record mode without any tracks armed. Recording will then
begin on any channel whose track-arming button is pressed. To enable this function:
Mouse/Keyboard Operation
•
Click the Windows menu and select the Settings window.
• Select the Transport tab. Check the box labeled Track Key Punch.
Front Panel Operation
• Press
the PREF button. Press the up/down buttons to select Track Key Punch
and press CHNG.
• Select either Off or On using the up/down buttons and press Enter.
53