Auto-Zone Control Systems Prism 2 Graphical Interface Technical Guide (Version 01J) - Manual (Page 38)

STEP 12: CREATING CUSTOM SCREENS
Prism 2 Technical Guide
38
Click on the job-site you wish to be
associated with this hot spot. As soon
as you click the job-site, the window
will close.
Multiple Hot Spots can be created
on the Main Screen Image, and each
hot spot can be associated with any
defi ned job-site listed in the Hot Spot
Job Selection Window.
In the future, all you need to do to
access your job-site is to click where
you placed its hot spot on the Main
Screen Image.
To clear a Hot Spot associated with a job-site, open the Job Sites
Window for that job-site and click the
< Clear> button in the Hot
Spots for Main Screen Picture fi eld.
Hot Spots